NETGEAR MBR1310 User Manual Download Page 44

Page: 44 / 103

USB Storage

NETGEAR Mobile Broadband 11n Wireless Router MBR1310

Create a folder.

•

You can specify the folder’s

share name and change the read access

and

write

access

from

All-no password

admin

•

The password for

admin

is the same one that is used to log in to the router main

menu. By default it is

password

Click

Apply

so that your changes take effect.

Unmount a USB Drive

WARNING:

Unmount the USB drive first before physically unplugging it from
the router. If the USB disk is removed or a cable is pulled while
data is being written to the disk, it could result in file or disk
corruption.

To unmount a USB disk drive so that no users can access it, from the USB Settings screen,
click the

Safely Remove USB

button. This takes the drive offline.

Specify Approved USB Devices

You can specify which USB devices are approved for use when connected to the router.



To specify approved USB devices:

On the router main menu, under Advanced, select

USB Settings

Summary of Contents for MBR1310








































































































Search results

Summary of Contents for MBR1310

Reviews:

Related manuals for MBR1310

Brands by name

Popular brands

NETGEAR MBR1310, User Manual

Search results

Summary of Contents for MBR1310

Reviews:

Related manuals for MBR1310

Brands by name

Popular brands