Advanced Settings
74
NETGEAR Mobile Broadband 11n Wireless Router MBR1310
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as DHCP and RIP.
These features can be accessed under Advanced in the router main menu.
The router is shipped preconfigured to use private IP addresses on the LAN side, and to act
as a DHCP server. The router default LAN IP configuration is:
•
LAN IP address. 192.168.0.1
•
Subnet mask. 255.255.255.0
These addresses are part of the Internet Engineering Task Force (IETF)–designated private
address range for use in private networks, and should be suitable in most applications. If your
network has a requirement to use a different IP addressing scheme, you can make those
changes in this screen.
Tip:
If you change the LAN IP address of the router while connected through
the browser, you will be disconnected, and so will others connected to
the router. To connect to the router, you have to open a new connection
to the new IP address and log in again. Others using the router have to
restart their computers to connect to the router again.
To view or change the LAN setup:
1.
Select
LAN IP
to display the LAN Setup
screen.
2.
Change the settings. For more information,
see the table on the following page,
DHCP
Settings
on page 75, or
Reserved IP
Addresses
on page 76.
3.
Click
Apply
to save the changes.
The LAN TCP/IP Setup parameters are
explained in the following table.
Settings
Description
Device Name
The device name of the router.
LAN TCP/IP
Setup
IP Address
The LAN IP address of the router.
IP Subnet Mask
The LAN subnet mask of the router. Combined with the IP
address, the IP subnet mask allows a device to know which other
addresses are local to it, and which has to be reached through a
gateway or router.
