Table 1. LED descriptions (Continued)
Description
LED
This LED indicates the connection between the extender and a 5 GHz WiFi client:
•
Solid blue. Best connection.
•
Solid amber. Good connection.
•
Solid red. Poor connection.
•
Off. No connection.
5 GHz Client Link LED
•
Blinking blue. The extender is attempting to connect with a router or
WPS-enabled device:
•
Solid blue. The extender is connected to a router or WPS-enabled device.
•
Off. The extender is not connected to a router or WPS-enabled device.
WPS LED
Buttons
Figure 2. Extender buttons
The side panel contains the following buttons:
•
WPS/Power button. This button acts as a WPS or Power button depending on how long you press it:
-
WPS. Press the button for less than five seconds to connect WPS-enabled device.
-
Power. Press the button for more than five seconds to turn the extender on or off.
•
Reset button. Pressing the Reset button for about five seconds resets the extender.
Overview
8
Nighthawk X4S AC2200 Tri-Band WiFi Range Extender
