Factory Default Settings
To reset the extender to factory default settings, you can use the Reset button on the side panel or you can
log in and click the onscreen RESET button. For more information, see
Return the Extender to Its Factory
on page 37.
The following table shows the factory default settings.
Table 2. Factory default settings
Default Settings
Feature
Enabled
Smart Setup
Enabled
WiFi communication
NETGEAR_EXT
WiFi network name (SSID)
Disabled
Security
Auto
1
Transmission speed
Varies by region
Country/region
802.11a/b/g/n/ac
Operating mode
54 Mbps/173 Mbps/400 Mbps
Data rate in the 2.4 GHz band
Disabled by default
(When enabled the data rate is 54 Mbps/173 Mbps/400
Mbps/866 Mbps)
Data rate in the 5 GHz 1 band
Disabled by default
(When enabled the data rate is 54 Mbps/347 Mbps/800
Mbps/1733 Mbps)
Data rate in the 5 GHz 2 band
Server and client are enabled
DHCP
1
Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead lower actual data
throughput rate.
Supplemental Information
49
Nighthawk X4S AC2200 Tri-Band WiFi Range Extender
