.El Design
eldesign.dk
NETGEAR DSL VVG2000
26/48
Router Status Help
You can use the
Router Status
page to check the current settings and statistics for your router. This
page shows you the current settings. If something needs to be changed, you'll have to change it on
the relevant page.
Account Name
: This is the Account Name that you entered in the
Setup Wizard
or
Basic Settings
.
Firmware Version
: This is the current software the router is using. This will change if you upgrade
your router.
ADSL Port
: These are the current settings that you set in the
Setup Wizard
or
Basic Settings
pages.
•
MAC Address - the physical address of the Router, as seen from the Internet.
•
IP Address - current Internet IP address. If assigned dynamically, and no Internet connection
exists, this will be blank or 0.0.0.0
•
DHCP - indicates either
Client
(IP address is obtained dynamically) or
None
.
•
IP Subnet Mask - the subnet mask associated with the Internet IP address Domain Name
Server - displayes the address of the current DNS.
LAN Port
: These are the current settings, as set in the
LAN IP Setup
page.
•
MAC Address - the physical address of the Router, as seen from the local LAN.
•
IP Address - LAN IP address of the Router.
•
DHCP - indicates if the Router is acting as a DHCP Server for devices on your LAN.
•
IP Subnet Mask - subnet mask associated with the LAN IP address.
Modem
: The current Modem status and settings are shown in this section.
•
ADSL Firmware Version - This is the version number of the low-level ADSL firmware. This
is contained within the Router Firmware.
•
Modem Status - the current state of the ADSL connection to your phone company.
•
DownStream Connection Speed - the connection speed of the ADSL connection from the
phone company to your Router.
•
UpStream Connection Speed - the connection speed of the ADSL connection from your
Router to the phone company.
•
VPI - the VPI setting entered on the ADSL Settings page.
•
VCI - the VCI setting entered on the ADSL Settings page.
Wireless Port
: These are the current settings, as set in the
Wireless Settings
page.
•
Name (SSID) - SSID of the Router.
•
Region - the location (country).
•
Channel - the current channel in use.
•
Mode - indicates the current mode ( g & b, g, or b )
•
Wireless AP - indicates if the Access Point feature of the Router is enabled or not. If not
enabled, the Wireless LED on the front panel will be off.
•
Broadcast Name - indicates if the Router is broadcasting its SSID.
Click
Show Statistics
to see router performance statistics such as the number of packets sent and
number of packets received for each port.
