background image

.El Design 

eldesign.dk

NETGEAR DSL VVG2000

47/48

UPnP Help 

Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, access 
the network and connect to other devices as needed. UPnP devices can automatically discover the 
services from other registered UPnP devices on the network. 

Turn UPnP On

UPnP can be enabled or disabled for automatic device configuration. The default setting for UPnP is 
enabled. If disabled, the router will not allow any device to automatically control the resources, 
such as port forwarding (mapping), of the router. 

Advertisement Period

The Advertisement Period is how often the router will advertise (broadcast) its UPnP information. 
This value can range from 1 to 1440 minutes. The default period is for 30 minutes. Shorter 
durations will ensure that control points have current device status at the expense of additional 
network traffic. Longer durations may compromise the freshness of the device status but can 
significantly reduce network traffic.

Advertisement Time To Live

The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. A hop 
is the number of steps allowed to propagate for each UPnP advertisement before it disappears. The 
number of hops can range from 1 to 255. The default value for the advertisement time to live is 4 
hops, which should be fine for most home networks. If you notice that some devices are not being 
updated or reached correctly, then it may be necessary to increase this value a little.

UPnP Portmap Table

The UPnP Portmap Table displays the IP address of each UPnP device that is currently accessing 
the router and which ports (Internal and External) that device has opened. The UPnP Portmap Table 
also displays what type of port is opened and if that port is still active for each IP address. 

To Save, Cancel or Refresh the Table

Click 

Apply

 to save the new settings to the router. 

Click 

Cancel

 to discard any unsaved changes. 

Click 

Refresh

 to update the portmap table and to show the active ports that are currently opened by 

UPnP devices. 

Summary of Contents for DSL VVG2000

















































Reviews: