.El Design
eldesign.dk
NETGEAR DSL VVG2000
14/48
USB Drive Settings Help
The VVG2000 allows file sharing when a USB hard drive or flash memory is connected to the USB
port.
Please consult the Reference Manual for detailed configuration information.
To access the USB Drive via FTP, use any FTP tool or type
ftp://ipaddress
in a Web browser such
as Microsoft Internet Explorer or Netscape. The ipaddress entered is the Web IP address of the
router, which can be located on the Router Status menu as the IP address of the Internet Port.
To access the USB Drive via Microsoft network connections, click Windows Start -> Run and type
\\ipaddress
. The ipaddress entered is the local IP address of the router, for example, 192.168.0.1.
Typing
\\hostname
in Windows Explorer is also an alternative. The hostname entered is the Host
Name specified in the Network Access section, for example, VVG2000.
Network Access
Host Name & Workgroup
The Host Name and workgroup combination is the name used to identify the router in your
network. The attached USB drive can be easily accessed by typing
\\hostname
in Windows
Explorer.
FTP Port
FTP port is the TCP port number of the embedded FTP server. The default value is 21.You can also
change to any port between 1024 and 65535.
To Apply
Click
Apply
to save the new settings to the Router.
FTP Access
FTP accounts can be created by clicking the Add button. These FTP accounts will allow users on
the LAN or Internet to access the files on the attached USB drive.
To Add,Edit,Delete or Eject Disk
Click
Add
to add a new information.
Click
Edit
to edit the selected information.
Click
Delete
to delete the selected information.
Click
Eject Disk
to eject the USB device.
Attached Device
This table shows the partition information of the attached USB drive, including the share name and
file system type.
To Refresh
Click
Refresh
to update the Attached Device table.
