NETGEAR DG824M - 802.11b Wireless ADSL Modem Reference Manual Download Page 108

Page: 108 / 163

Technical Specifications

A-1

Appendix A

Technical Specifications

This appendix provides technical specifications for the DG824M Wireless ADSL Modem
Gateway.

Network Protocol and Standards Compatibility

Data and Routing Protocols:

TCP/IP, RIP-1, RIP-2, DHCP, PPP over Ethernet (PPPoE) or
PPP over ATM (PPPoA), RFC 1483 Bridged or Routed
Ethernet, and RFC 1577 Classical IP over ATM

Power Adapter

North America:

120V, 60 Hz, input

United Kingdom, Australia:

240V, 50 Hz, input

Europe:

230V, 50 Hz, input

Japan:

100V, 50/60 Hz, input

All regions (output):

15 V AC @ 1.0A output, 30W maximum

Physical Specifications

Dimensions:

10" x 6.7" x 1.3"

255 mm x 169 mm x 34 mm

Weight:

1.4 lbs.

0.62 kg

Environmental Specifications

Operating temperature:

to 40

C (32º to 104º F)

Operating humidity:

90% maximum relative humidity, noncondensing

Summary of Contents for DG824M - 802.11b Wireless ADSL Modem




































































































































































Search results

Summary of Contents for DG824M - 802.11b Wireless ADSL Modem

Reviews:

Related manuals for DG824M - 802.11b Wireless ADSL Modem

Brands by name

Popular brands

NETGEAR DG824M - 802.11b Wireless ADSL Modem, Reference Manual

Search results

Summary of Contents for DG824M - 802.11b Wireless ADSL Modem

Reviews:

Related manuals for DG824M - 802.11b Wireless ADSL Modem

Brands by name

Popular brands