NETGEAR DG824M - 802.11b Wireless ADSL Modem Reference Manual Download Page 11

Page: 11 / 163

About This Guide

Chapter 1

About This Guide

Thank you for purchasing the NETGEAR

™

DG824M Wireless ADSL Modem Gateway.

Audience, Conventions, Scope

This reference manual assumes that the reader has basic-to-intermediate computer and Internet
skills. However, basic computer network, Internet, firewall, and networking technology tutorial
information is provided in the Appendices.

This guide uses the following typographical conventions:

This manual is written for the DG824M wireless gateway according to these specifications.:

Table 1.

Typographical conventions

italics

Emphasis, books, CDs, URL names

bold times roman

User input

courier font

Screen text, file and server names, extensions, commands, IP addresses

Note:

This format is used to highlight information of importance or special interest.

Table 1-1.

Manual Specifications

Product Version

DG824M Wireless ADSL Modem Gateway

Manual Publication Date

July 2003

Note:

Product updates are available on the NETGEAR, Inc. web site at

http://

www.netgear.com/support/main.asp

. Documentation updates are available on the

NETGEAR, Inc. web site at

http://www.netgear.com/docs

Summary of Contents for DG824M - 802.11b Wireless ADSL Modem




































































































































































Search results

Summary of Contents for DG824M - 802.11b Wireless ADSL Modem

Reviews:

Related manuals for DG824M - 802.11b Wireless ADSL Modem

Brands by name

Popular brands

NETGEAR DG824M - 802.11b Wireless ADSL Modem, Reference Manual

Search results

Summary of Contents for DG824M - 802.11b Wireless ADSL Modem

Reviews:

Related manuals for DG824M - 802.11b Wireless ADSL Modem

Brands by name

Popular brands