NETGEAR AirCard 790 Page 13 User Manual Download

Page: 13 / 113

Get Started

AirCard 790 Mobile Hotspot

Set Up and Connect to the Internet

The battery and micro SIM card are preinstalled in your hotspot. If you need to reinstall these
components, complete the steps in the sections listed in steps 1 and 2.



To set up and connect to the Internet:

Install the Micro SIM card.

For more information, see

Install the Micro SIM Card

on page

13.

Install the battery.

For more information, see

Install the Battery

on page

14.

Connect to the Internet.

For more information, see

Connect to the Internet

on page

15.

Personalize the hotspot.

For more information, see

Personalize the Hotspot

on page

16.

Install the Micro SIM Card



To insert the SIM card:

Remove the hotspot back cover by lifting at the notch on either corner of the device.

If present, remove the battery.

Insert the micro SIM card.

Micro SIM card

Summary of Contents for AirCard 790


















































































































Search results

Summary of Contents for AirCard 790

Reviews:

Related manuals for AirCard 790

Brands by name

Popular brands

NETGEAR AirCard 790, User Manual

Search results

Summary of Contents for AirCard 790

Reviews:

Related manuals for AirCard 790

Brands by name

Popular brands