NETGEAR AirCard 790 Page 15 User Manual Download

Page: 15 / 113

Get Started

AirCard 790 Mobile Hotspot

Insert the battery as shown.

Battery

Gold contacts

Ensure that the gold contacts on the battery line up with the gold contacts on the device.

Replace the back cover.

Note:

The battery comes partially charged and ready to use. When the
battery needs recharging, follow the instructions in

Connect to the Internet

Your computer and other devices can connect to the hotspot wirelessly. You can also
connect to the Internet with the hotspot tethered to a computer with the USB cable. See

Tethered Mode

on page

17.



To connect to the Internet:

Press and hold the

Power

key for a few seconds.

The hotspot powers up and automatically searches for and connects to your network
provider’s mobile broadband network.

Summary of Contents for AirCard 790


















































































































Search results

Summary of Contents for AirCard 790

Reviews:

Related manuals for AirCard 790

Brands by name

Popular brands

NETGEAR AirCard 790, User Manual

Search results

Summary of Contents for AirCard 790

Reviews:

Related manuals for AirCard 790

Brands by name

Popular brands