NetComm 3G21WE, User Manual

Page: 34 / 50

34
Etisalat HSPA+ WiFi Router USER GUIDE
Advanced
6.8.2 PASSWORDS
The Passwords option configures your account access password for your Router. Access to
the device is limited to the following three user accounts:
• admin is to be used for local unrestricted access control
• support is to be used for remote maintenance of the device
• user is to be used to view information and update device firmware
Use the fields illustrated in the screen below to change or create your password. Passwords
must be 16 characters or less with no spaces. Click Save/Apply to continue.
6.9 Simple Network Management Protocol (SNMP)
The Simple Network Management Protocol (SNMP) allows a network administrator to monitor
a network by retrieving settings on remote network devices. To do this, the administrator
typically runs an SNMP management station program such as MIB browser on a local host
to obtain information from the SNMP agent, in this case the 3G21WE (if SNMP enabled).
An SNMP ‘community’ performs the function of authenticating SNMP traffic. A ‘community
name’ acts as a password that is typically shared among SNMP agents and managers.
By default, SNMP agent is enabled on the Router.
SETTING UP SNMP AGENT
1. Open a web browser (Ie/Firefox/Safari), type in LAN address of the Router
(http://192.168.1.1/ by default) to log into the web interface.
2. The login username and password by default is admin/admin.
3. Go to Advanced Settings > SNMP. Enable SNMP agent and set up all options according
to the screenshot below.
4. Click Save/Apply to activate these settings.