NetComm 3G21WE, User Manual

Page: 28 / 50

28
Etisalat HSPA+ WiFi Router USER GUIDE
INCOMING IP FILTER
The default setting for all Incoming traffic is BLOCKED. Under this condition only those
incoming IP packets that match the filter rules will be ACCEPTED.
To add a filtering rule, click the Add button. The following screen will display.
Please refer to the Outgoing IP Filter table for field descriptions.
Click Save/Apply to save and activate the filter.
6.4 ROUTING
Static Route and Dynamic Route settings can be found in the Routing link as illustrated
below.
6.4.1 STATIC ROUTE
The Static Route screen displays the configured static routes. Click the Add or Remove
buttons to change settings.
Click the Add button to display the following screen.
Enter Destination Network Address, Subnet Mask, Router IP Address and/or WAN Interface.
Then click Save/Apply to add the entry to the routing table.
Advanced