NetApp SteelStore 30 Series, Owner'S Manual

Page: 39 / 71

NetApp SteelStore Cloud Integrated Storage xx30 Series Hardware Owner’s Manual
34
4.2 Powering Off the Appliance
1
Shut down any applications that are running on the server.
2
Shut down the operating system on the server.
3
Remove all AC power cords from the appliance.
Note Until the AC power cords are removed, the system will still be running in standby mode.
Important The appliance will not be completely isolated from the power source unless both power cords are
disconnected.
4.3 Drive Anti-Tamper Locks
Anti-tamper locks are fitted in the drive carrier handles.
4.3.1 Activating the Locks
1 Carefully insert the key (a Torx T10 screwdriver provided with the appliance) into the anti-tamper lock
in the handle (see
Figure 4–1 ).
2
Rotate the key in a clockwise direction until the indicator is visible in the aperture beside the key.
).
3 Remove the key.
4.3.2 De-Activating the Locks
1 Carefully insert the key (a Torx T10 screwdriver provided with the appliance) into the anti-tamper lock
in the handle.
2
Rotate the key in a counterclockwise direction until the indicator is no longer visible in the aperture
beside the key.
3 Remove the key.
Note
A drive carrier cannot be installed if its anti-tamper lock is activated outside the appliance.
Figure 4–1 Activating the Anti-Tamper Lock