NetApp E-Series 3040 40U, Manual

Page: 24 / 32

18 Model 3040 40U Cabinet Installation
Installing Other
Components
1. If you have additional trays that must be installed, install the mounting hardware
for these trays. See “
Installing the Cable Spools and the Tie Wraps
” on page
16
.
2. If the front of the cabinet is not completely filled with trays, use front panel kits
to cover the empty spaces above or below the installed trays. Covering the empty
spaces is necessary so that the correct airflow through the cabinet is maintained.
3. Refer to the controller-drive tray installation guides for the trays that are
contained in the cabinet, and complete the power-on procedures described in the
guides.