NetApp E-Series 3040 40U, Manual

Page: 21 / 32

Chapter 3: Completing the Installation 15
3
Completing the Installation
Four steps complete the installation procedure:
1. Lower the stability foot and the leveling glides.
2. Reinstall the trays, components, and cables.
3. Install the cable spools and tie wraps.
4. Install the other components.
Lowering the
Stability Foot
The stability foot prevents the cabinet from falling over after it is placed in its
permanent location. Lower the stability foot and lower the leveling glides on the
cabinet when the cabinet is in its permanent location.
Figure 3
provides a close-up
view of the stability foot. The leveling glides are located near each bottom corner of
the cabinet.
Figure 3 Stability Foot