NetApp E-Series 3040 40U, Manual

Page: 19 / 32

Chapter 2: Installing the Cabinet 13
It is recommended that you remove the top-most devices in your cabinet to make sure
that the cabinet is safely transported to its final location. This is especially important
if any ramp has an incline or a decline greater than 10 degrees.
NOTE Many of the cabinets are populated with drive trays. This situation results in
most of the weight in the front portion of the cabinet, making the center of gravity
closer to the front.
1. Move the cabinet to its permanent location.
Figure 2 Incorrect Method and Correct Method for Moving the
Cabinet
2. After the cabinet is in position, lower the leveling glides, which are located near
each bottom corner of the cabinet.
83004-01
Rear of Cabinet
Front of Cabinet