Nespresso AG440PRO, User Manual

Page: 17 / 70

17
EN
Milk parameter: Milk foam set-
tings
Milk parameter: Refrigerator
settings
Cup heater
Menu Settings
- Milk parameters
• Milk foam settings:
- Hot Foam
- Cold Foam
• Refrigerator settings
- Cup heater
Press the Rinse button for 3 sec.
Enter USER MENU.
USER MENU
MILK PARAMETERS
Select MILK PARAMETERS.
Enter
MILK PARAMETERS
Hot foam left = 0.0%
Select “Hot foam left = 0.0%”
Enter
Hot foam left = 0.0%
[ -10.0 ... ◄ 0% ► ... 10.0]
Increase or decrease the amount
of air in the hot milk foam if neces-
sary. Range: -10% to 10% from
default.
Enter
MILK PARAMETERS
Hot foam left = 3.0%
Exit the menu.
Press the Rinse button for 3 sec.
Enter USER MENU.
USER MENU
MILK PARAMETERS
Select MILK PARAMETERS.
Enter
MILK PARAMETERS
Refrigeration temperature = 40.0 °F
Select
“Refrigeration temperature =
40.0 °F”
Enter
Refrigeration temperature = 40.0 °F
[ 39.0 ... ◄ 40.0 °F ► ... 46.0 ]
Increase or decrease the refrigera-
tion temperature as needed or set
to DEFAULT (recommended).
Enter
Exit the menu.
Press the Rinse button for 3 sec.
Enter USER MENU.
USER MENU
MACHINE PARAMETERS
Select MACHINE PARAMETERS.
Enter
MACHINE PARAMETERS
Cup heater = On
Select
“Cup heater = On”
Enter
Cup heater = On
◄ On ►
Select “On” or “Off”
Enter
Exit the menu.
Milk Foam Settings
To change the amount of milk
foam, simply change the % of
air in the milk foam as shown
on this page:
• -10%: Less foam
• 0%: Default
• +10%: More foam
Repeat this process for
Hot foam right, Cold foam left,
Cold foam right, if necessary.
What if a “Call technician“
message appears?
Call your
Nespresso repre-
sentative.
Description Display message LED status Remarks
Change water filter
Change water filter
Ready
Alternating
Immediately call your
Nespresso
representative.
Service required
Service required
Ready
Alternating
Immediately call your Nespresso
representative.
Milk container(s)
empty
Ready
Add milk
Alternating
Milk products are locked.
Fill up the milk container(s) (in refrigera-
tor).
Clean the suction tubes to make sure
milk residue is not blocking the sensors.
Milk level low
Ready
Milk level low
Alternating
Indicates that the milk container(s) will
soon be empty.
Fill up the milk container(s) (in refrigera-
tor).
Automatic rinsing
mode
(5 min delay)
Rinsing in progress
Please wait
Automatic rinsing of external milk system
starts 5 min after the last milk-based
beverage is prepared. “Rinsing in pro-
gress” and “Please wait” appear on the
display. LEDs start to flash 10 sec before
rinsing.
Cleaning required in
x.yy hrs.
Ready
Cleaning required in x:yy hrs
Alternating
When timer ends, the machine will be
locked until cleaned.
Alarms/Notifications
The settings for the left milk
container do not automati-
cally apply to the right milk
container. The settings for
both containers have to be
configured separately.