Nerf C17DR00G0, User Manual And Installation Instructiions, Page: 8 / 44

en
Before using for the first time
8
2.
Do not push the steaming tray beyond the recess
⁠.
3.
Take hold of the steaming tray in the middle to in-
sert it.
5.3 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.neff-international.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Water hardness range
Before using the appliance for the first time, ask your
water supplier about the hardness of your tap water. To
ensure that the appliance can reliably remind you to
descale it when required, you must set your water hard-
ness range correctly.
ATTENTION!
If the wrong water hardness has been set, the appli-
ance cannot remind you to descale it at the right time.
▶
Set the water hardness correctly.
Using unsuitable liquids may damage the appliance.
▶
Do not use distilled water, highly chlorinated tap wa-
ter (>40 mg/l) or other liquids.
▶
Only use cold, fresh tap water, softened water or
non-carbonated mineral water.
Water hardness range Setting
0 0 softened
1 (up to 1.3 mmol/l) 1 soft
2 (1.3 - 2.5 mmol/l) 2 moderately hard
3 (2.5 - 3.8 mmol/l) 3 hard
4 (above 3.8 mmol/l) 4 very hard
Notes
¡
If your water is very hard, use softened water.
¡
If you are using softened water, set the water hard-
ness range to "0 softened".
¡
If you are using mineral water, set the water hard-
ness range to "4 very hard".
¡
If you are using mineral water, you must always use
non-carbonated mineral water.
6.2 Initial configuration
When the appliance is connected to the power supply
for the first time or following a lengthy power failure, the
settings that you will need to configure before you can
use it will appear.
Note:
You can change these settings at any time by
going to the basic settings.
→
"Basic operation", Page 9
Setting the language
1.
Use the button to navigate to the bottom row.
2.
Use the or button to select the required language.
3.
Use the button to return to the "Language" set-
ting.
4.
Use the button to select the next setting.
Setting the time
1.
Use the button to navigate to the next row.
2.
Use the or button to set the current time.
3.
Press ⁠.
4.
Use the button to select the next setting.
Setting the date
1.
Use the button to navigate to the next row.
2.
Use the or button to set the current day.
3.
Use the button to return to the "Day" setting.
4.
Use the button to select the next setting.
5.
Use the button to navigate to the next row.