Nerf C17DR00G0, User Manual And Installation Instructiions, Page: 21 / 44

Troubleshooting
en
21
2.
Push the front panel closed until the two upper
hooks are opposite the opening.
3.
Push the front panel in at the bottom until you hear
it click into place.
4.
Open the appliance door slightly and remove the
tea towel.
5.
Screw the screws on the left and right back in.
6.
Put the cover back in place and press on it until you
hear it click into place.
7. Close the appliance door.
13 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
13.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not working. The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
Appliance cannot be switched
on,
appears on the display.
The automatic childproof lock is activated.
▶
Press and hold the button until goes out on the display.
Appliance is switched on but
controls not responding;
ap-
pears on the display.
Childproof lock is activated.
▶
Press and hold the button until goes out on the display.