WorldPhone Liberator – Chapter 4. Data Service
4.22
M e n u
M e n u
M e n u
Data/printer port setup cont’d
Data/printer port setup cont’d
Hot dial:
When enabled, this function monitors the DTR-pin on the DATA port.
If the DTR-pin is pulled high by equipment connected to the DATA
port, a data call is automatically initiated to a pre-programmed
number. The number is automatically stored under short number 99.
9
Scroll down to
Hot Dial:
10
Setup
opens the
Phone book editing
window.
Enter name, f.ex. "Hot".
Fill in required number,
and change provider
and network, if needed.
Initial mode:
The mode is set to AT modem as default.
When selecting any of the MMI (Man Machine Interface) settings, the
PC screen automatically displays the WorldPhone menu.
11
Choose Initial mode
(step 9), and scroll down
to required MMI interface:
Selct
enters the chosen mode:
12
Save
stores the settings:
ª U
Edit mode in the Phone book
> Name
: Hot
_
Number : 004766779016
Net provider: Default Net
Terrestrial net: 00
Hot dial
470
SIM
<Del
Save
Ctrl + T for Help
<+U> <+I>
<+O>
<+P>
ª P
ª O
470
SIM
Setup Enab Disab
Save
Ctrl + T for Help
<+U> <+I>
<+O>
<+P>
3 – Data/printer port setup
Bit rate:
9600 bps
Printer : Enabled
AT modem: Disabled
> Hot Dial:
Enabled
_
>
>
Initial mode: AT mode
>
470
SIM
Setup Enab Disab
Save
Ctrl + T for Help
<+U> <+I>
<+O>
<+P>
3 – Data/printer port setup
Bit rate:
9600 bps
Printer : Disabled
AT modem: Disabled
Hot Dial:
Enabled
Initial mode: AT mode
470
SIM
Selct
Ctrl + T for Help
<+U> <+I>
<+O>
<+P>
3 – Data/printer port setup
Bit rate:
9600 bps
Printer : Disabled
AT modem: Disabled
Hot Dial:
Enabled
> Initial mode: AT mode
Initial mode
> AT modem
MMI (ASCII)
MMI (extended ANSI)
MMI (multilingual)
