WorldPhone Liberator – Chapter 4. Data Service
4.2
Initial settings of the WorldPhone Liberator
•
Speed, normally 9600 bps.
•
8 data bits
•
No parity
•
1 stop bit
Initial settings of the PC
Use a PC terminal emulator program, f.ex. HyperTerminal.
1
Start the HyperTerminal.
2
Enter a name for the terminal, f.ex. "modem_test".
3
In the "
Phone Number
" window, select
Direct to COM1
(or the
COM port the WorldPhone Liberator is connected to).
4
In the "
COM1 Properties
" window, set as follows:
•
Bits per second: 9600 bps.
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Flow control: None
5
In the
File
menu, select
Properties
then click
Settings
and select
Terminal
.
6
Select
ANSI
in the
Emulation
list box.
7
In the
View
menu, click
Fonts
. Select
Terminal
in the
Fonts list.
Set the size to 11 points.
8
Click on
Ok
.
Testing the installation
Entering a command on the PC keyboard (f.ex.
ATç
) should
cause "OK" to be displayed on the screen.
If there is no response, check that the baud rate setting is the same
both for the PC and the WorldPhone.
Setting up cont’d
Setting up cont’d
