Neptune TRU/FLO, Installation And Maintenance Manual

Page: 19 / 58

TRU/FLO Compound Meter Installation and Maintenance Guide 7
3 General Installation Guidelines
This chapter describes tools, materials, and general installation information for the 3-inch,
4-inch, and 6-inch TRU/FLO meters.
Tools and Materials
Table 7 shows the recommended tools you need to successfully install or perform
maintenance on the TRU/FLO meter.
Safety and Preliminary Checks
Complete the following safety and preliminary checks before and during each installation:
• Verify that you are at the location specified on the Site Work Order.
• Verify that the site is safe for you and your equipment.
Table 7 is not a complete list of tools.
Table 7 Recommended Tools
Part Number Description
N/A Contains standard tools including:
•
Flathead Screwdrivers
• Hammer
• Pliers
• 7/16-inch Wrench
• Tool to Remove Snap Ring
9685-002, 003, 004, 005 Gasket Kit (size dependent).
11097-610, 600, 700, 800 Calibration Vane Assembly (size dependent).
9571-100, 110, 200, 300 Throttle Tube Assembly (size dependent).
9485-011, 006, 003, 008 Magnet Drive Assembly (size dependent).
9681-004, 001, 002, 003 Valve Assembly Kit (size dependent).
N/A Flashlight.