Neopost AS-940, Operating Manual

Page: 9 / 50

SECTION 1
GETTING ACQUAINTED
Rear View
7.
REAR MEDIA GUIDE
– Allows for adjustments in stack angle, based on media
type and length. Helps to force the media against the separation area.
8.
MOTOR CIRCUIT BREAKER
– The circuit breaker protects the printer’s motor from
overload.
9.
FEED ROLLERS –
(8 serrated, 4 black) Delivers the bottom piece of media, from the
stack, through the separation area, and under the forwarding rollers.
10.
MEDIA THICKNESS ADJUSTMENT DIAL
– Is used to set the printheads at the
proper height for printing on the media.
11.
SHEET SEPARATOR LOCKING LEVER
– Is used to lock the separators in place
after they are adjusted.
12.
SHEET SEPARATORS
– (four) Use to separate a single piece of media from the stack.
13.
USB PORT
– Connects the printer to the USB port on your computer.
14.
PARALLEL PORT
– Connects the printer to the parallel printer port on your computer.
15.
MAIN POWER SWITCH
– This switch turns the printer ON and OFF.
16.
MAIN POWER FUSE
– This fuse protects all of the electronic circuits in the printer.
17.
POWER RECEPTACLE
– The power cord is plugged in here.
Figure 7
© 2009 Neopost USA Inc. All rights reserved. 9