Neopost AS-940, Operating Manual, Page: 29 / 50

4. While watching the printer status in the “Printers” folder; power the printer
off, wait 10 seconds, and power the printer on.
Tip: To display the printer “status” column in the “Printers” folder; click on
“view” and then select “details”.
ƒ
The printer status should toggle from “offline” to “ready” when you
power the printer on.
ƒ
The status should toggle from “ready” to “offline” when you power the
printer off.
IMPORTANT! You may need to repeat this step (power printer off/on)
more than once, for the system to recognize the printer and to see the
status change.
5. If the printer status does NOT change, when you power the printer off and
on; click on the “Ports” tab, then locate and select the next USB port
selection in the list.
Then click on Apply.
6. Go to Step # 4.
7. If the printer status changes when you power the printer off/on then close
the printer driver’s properties window by clicking on OK.
8. You are Finished.
Your printer driver has been properly configured for the USB port you are
connected to and the driver is communicating with printer.
You are ready to begin printing.
SECTION 3
OPERATING THE PRINTER
© 2009 Neopost USA Inc. All rights reserved. 29