OOO Neomatica. Terminal ADM007 GLONASS / GPS. Rev.1.3 dated 13.09.2019
12
5.5. Setting route (track) drawing
5.5.1 Selecting presets of route drawing quality
To facilitate the process of setting the route drawing quality there are several factory presets.
The preset can be selected in ADM
Сonfigurator (version 2.4.5 at least) or by
TRACKSET
command
.
The presets contain several sets of parameters. In total 5 presets are available. All
presets allow to get a drawing of the travel path, the differences are in the degree of route details.
The more detailed route is the more route points will be transmitted to the server, this increases the
traffic consumption. Less detailed route reduces traffic consumption.
•
TRACKSET command description:
TRACKSET X
X
–number of route drawing preset
X = 0..4
In response a total list of set parameters will be displayed.
Answer example: TRACK 4,1000,100; (1):3,5; (2):3,5; (3):3,5
Command without parameters displays current route settings.
•
Presets description:
TRACKSET 0
Satisfactory tracking quality, money-saving variant as regards route points and traffic
consumption. The quality is enough to monitor the movement path. The drawing of road turns is
simplified. Slight route changes are not drawn (expected points per km are twice less than in preset
2).
TRACKSET 1
A good tracking quality. The drawing of slight changes of direction and road turns is simplified
(expected points per km are 1.3 times less than in preset 2)
TRACKSET 2
Set by default. A good tracking quality. The variant suits to the most of tasks. Is an average
variant as regards tracking drawing quality and traffic consumption. Slight direction changes and
road turns are drawn with details.
TRACKSET 3
Slight changes in direction are drawn with more details (expected points per km are 1.3 times
more than in preset 2)
