background image

 
OOO Neomatica. Terminal ADM007 GLONASS / GPS. Rev.1.3 dated 13.09.2019

 

 

1 Purpose and Function 

The tracker is intended for installation on a vehicle as an additional device that records the location 

of  the  vehicle,  its  speed,  and  travel  direction.  View  of  the  tracker  is  shown  in  Figure  1.                

Additionally, the voltage level at the analog input is recorded.  All events and conditions fixed by the 

tracker are stored in its non-volatile memory. 

The  accumulated  data  is  transmitted  through  the  GSM  850/900/1800/1900  cellular  network 

operator using packet  data transmission technology GPRS to a dedicated server with a static IP 

address  or  domain  name  from  which  it  can  be  received  via  the  Internet  for  further  analysis  and 

processing in a monitoring center.  

The  tracker  can  be  configured  in  any  convenient  way:  locally  (via  Bluetooth,  using  the 

Configurator  program)  or  remotely  (by  sending  commands  via  SMS  or  GPRS). 

To ensure data security,  when the external power is turned off and the GSM network is lost, the 

tracker  has  got  a  non-volatile  memory.  Data  transmission  is  possible  only  if  there  is  a  GSM 

850/900/1800/1900 cellular network supporting a packet data service (GPRS). 

 

Figure 1 - View of the tracker (the wires are not shown) 

 

The vehicle travel route is described in the form of separate points in time. The route point is 

saved when at least one event occurs, such as:  

 travel direction changes by an angle which is greater than the pre-set one; 

  the straight-ahead travel is performed at a distance, which is longer than the pre-set one; 

 the pre-set acceleration limit is broken;  

 the time for putting the point while traveling (parking) is expired;  

 device status change (see the Appendix A);  

 an event occurs on analogue input. 

       In this way, route points can be saved with the time interval from one second to several 

minutes allowing for a quality routing, recording any changes without a surfeit of information saved 

in the “black box” and increase in GPRS traffic.  

Summary of Contents for ADM007



























Reviews: