USER MANUAL
DIAGNOSTICS
8
NEOFOLD S
VERSION:
NLF_PB-S-2015-1S-GB
45
Lining up the folds
8.3
Neofold 920S / 1250S
The operator can adjust the alignment of the folds. Follow this procedure to change this
value:
Start up the machine by pressing the following key
The display will show the current value, to increase this value press this key
To decrease the value press this key
.
Every time the key is pressed the value increase or decreases by 0,17mm.
After the new value has been set, wait about 5 seconds and the display will show
OF
at
this point, the new value has been memorized. Switch the machine off and then back on.
