USER MANUAL
GENERAL INFORMATION
1
NEOFOLD S
VERSION:
NLF_PB-S-2015-1S-GB
5
Conventions used
1.4
Conventional terms
1.4.1
Machine:
indicates the machine specified in
1.6
.
Identification data of the machine.
Casing:
bearing structure of the machine.
Qualified personnel:
people, who thanks to their knowledge and experience, as well as
the knowledge of the relevant norms, safety requirements and service norms, are able to
recognise and avoid any possible danger for the people, the material and the machine.
The descriptions of
direction
,
sense and position
(on the right of the machine, on the
left of the machine) refer to the position of the operator in front of the machine.
Conventional symbols used
1.4.2
Text in italics:
indicates the title of a chapter, a section, a sub-section, a paragraph, a
chart or a picture of this manual, or another reference manual.
1
(generic number as an example): symbolic representation of a command device or
signal.
A
(generic letter as an example): symbolic representation of a part of the machine.
Notes contain important information, and are pointed out after the text they refer to.
The danger symbols indicate those procedures, which, if not observed, could cause
physical damages to the operator. The manufacturer cannot be held responsible for any
damages to people due to non-compliance with these norms.
The warning symbols indicate those procedures which, if not observed, could damage the
machines or the devices connected to it. The manufacturer cannot be held responsible for
any damages to objects due to the non-compliance with these norms.
