10
⬥
A steady green light on the battery charger indicates that the
battery is fully charged.
Note:
The battery is equipped with an NTC
temperature controller that only allows it to be
charged when its temperature is between 50˚F
-
104˚F
(10°C -40°C), ensuring a long battery service life.
3.
When you are ready to use the battery, unplug the battery
from the charger and attach it to the reciprocating saw.
Changing the Battery
Caution:
Use only a Li-ion battery from the original
factory with the voltage listed on the nameplate of
your reciprocating saw. Using other batteries not
suitable for the saw can lead to malfunctions, cause
damage to the power tool, and pose a fire hazard.
⬥
To attach a battery pack to the reciprocating saw, align the
battery pack socket with the 3-prong connector at the base of
the tool body, then push the battery up until it clicks into place.
Lock the clips on the sides of the battery pack to secure it in
position.
⬥
To remove the battery pack from the saw, unlock the clips on
the battery pack that secure it in position, and then pull down
on the battery pack to remove it from the socket.
Installing a Saw Blade
1.
Remove the battery from the reciprocating saw.
2.
Turn the chuck on the blade clamp clockwise to unlock it.
Summary of Contents for RS-18-6Li-50
Page 1: ......
