Chapter 3 BIOS Setup
45
the computer can “wake” on input from the keyboard, clock, modem, LAN, or
USB device.
USB Power In S5
Enable/Disable the power of USB ports.
----Advanced Resume Event Control----
USB / PS2 from S3 / S4
The item allows the activity of the USB / PS2 device to wake up the system
from S3 / S4 sleep state.
Resume On OnChip GbE from S5
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard LAN is detected.
PCIE / PCI PME
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard PCIE / PCI PME is detected.
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard LAN / mini PCI-E is detected.
Ring
These fields specify whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or
component is detected.
Important
You need to install a modem card supporting power on function for “Wake
Up On Ring” function.
RTC
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
