Nematron AEMQ77-989 User Manual Download Page 42

Page: 42 / 47

Chapter 3 BIOS Setup

Enable / Disable ME FW Image ReFlash function.
Note: Enable this option if BIOS update requires an update of the
Intel Management Engine (ME).



Intel(R) Anti-Theft Technology Configuration



Intel(R) Anti-Theft Technology

This item is used to enable/disable the Intel Anti-Theft Technology.



Intel(R) Anti-Theft Technology Rec

Set the number of times recovery attempted will be allowed.



Enter Intel(R) AT Suspend Mode

This item is used to enable or disable the request that platform enters AT
suspend mode.



AMT Configuration



Intel AMT

This item is used to enable/disable Intel Active Management Technology
BIOS Extension. Note: iAMT H/W is always enabled. This option just
controls the BIOS extension execution. If enabled, this requires

Summary of Contents for AEMQ77-989
















































Search results

Summary of Contents for AEMQ77-989

Reviews:

Related manuals for AEMQ77-989

Brands by name

Popular brands

Nematron AEMQ77-989, User Manual

Search results

Summary of Contents for AEMQ77-989

Reviews:

Related manuals for AEMQ77-989

Brands by name

Popular brands