Chapter 3 BIOS Setup
44
Power
ACPI Sleep State
This item specifies the power saving modes for ACPI function. If your
operating system supports ACPI, you can choose to enter the Standby mode
in S1 (POS) or S3 (STR) fashion through the setting of this field.
Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before power
failure or interrupt occurred.
Deep S5
The setting enables/disables the Deep S5 power saving mode. S5 is almost
the same as G3 Mechanical Off, except that the PSU still supplies power, at a
minimum, to the power button to allow return to S0. A full reboot is required.
No previous content is retained. Other components may remain powered so
