Chapter 2 Hardware Setup
13
5.
Secure the lever near the hook
end under the retention tab.
6.
Make sure the four hooks are in
proper position before you install
the cooler. Align the holes on the
mainboard with the cooler. Push
down the cooler until its four clips
get wedged into the holes of the
mainboard.
7.
Press the four hooks down to
fasten the cooler. Turn over the
mainboard to confirm that the
clip-ends are correctly inserted.
8.
Finally, attach the CPU Fan cable
to the CPU fan connector on the
mainboard.
Important
Confirm if your CPU cooler is firmly installed before turning on your
system.
Do not touch the CPU socket pins to avoid damaging.
Whenever CPU is not installed, always protect your CPU socket pin with
the plastic cap covered to avoid damaging.
Please refer to the documentation in the CPU cooler package for more
details about the CPU cooler installation.
