Part No. 729-110-040 Rev. 1.41 | June 2016
© 2016 Nelson Stud Welding, Inc. All Rights Reserved.
11
2
Delivery & Transport
2.1
Package & Dispatch
Unless specified, the type of packing complies with HPE regulations, given by the Federal Association for
Wooden Materials, Pallets and Export Packing.
2.2
Inspection of Incoming Materials
Each Nelson welder is rigorously tested prior to shipment, and includes a copy of the testing protocol.
On arrival, the welding unit must be checked for damage as well as for the completeness of the parts within the
extent of delivery.
Any possible transport damage and/or missing parts must be immediately made known to the manufacturer or
the authorized forwarding company.
2.3
Storage
If the welding unit is not operated upon delivery, it must be stored immediately in a secured place.
The Arc Charger must be sufficiently protected against dust and/or moisture. The relative air humidity is
acceptable at 0% to 50% in 104°F (40°C) temperature and 0% to 90% at 68°F (20°C).
As for storage temperature, the unit must be stored at a temperature higher than 13°F (-20°C), but no higher
than +140°F (+60°C).
Take caution and ensure compliance to prevent damage to the unit.
Summary of Contents for ArcCharger N550C DOMESTIC
Page 18: ...Part No 729 110 040 Rev 1 41 June 2016 2016 Nelson Stud Welding Inc All Rights Reserved 17 ...
Page 60: ...Part No 729 110 040 Rev 1 41 June 2016 2016 Nelson Stud Welding Inc All Rights Reserved 59 ...
Page 62: ...Part No 729 110 040 Rev 1 41 June 2016 2016 Nelson Stud Welding Inc All Rights Reserved 61 ...
Page 64: ...Part No 729 110 040 Rev 1 41 June 2016 2016 Nelson Stud Welding Inc All Rights Reserved 63 ...