Page 12
diagram below or the label on the feeder cable.
l) Check that the output of the chain is perfectly aligned
with the bracket. In the event that this should not be the
case, loosen the fixing screws and reposition the bracket
correctly.
m) Perform a complete test of opening and closing of the
window frame. After closure, check that the window
frame is completely closed and check pressure against
the seals.
Figure 10
n) The stroke-end of the actuator during return is automatic. The appliance exerts
traction of over 280N to guarantee perfect pressure against the seals.
9. Electrical connections
Machines have been equipped with a power connection cable which complies with
safety regulations and protection against radio disturbance.
Before performing the electrical connection consult the table below and check
correspondence between the feeder cable and the tension data on the actuator
label.
Voltage
Cable
length
Number
of wires
Colour of
wires
110/230V~ (a.c.), 50/60Hz
1 m
3
LIGHT BLUE
BLACK
BROWN
24V═ (d.c.)
1 m
2
LIGHT BLUE
BROWN
If feeder cables require extending to the control button for low voltage actuators
(24V
═DC), cable sections should be selected accordingly. Conductor sections are
indicated in the table on page 8
(Selection of cable section)
. For cabling, follow the
diagrams below.
110/230V~ (a.c.), 50/60Hz
24V
═ (d.c.)
