Page 10
For fixing onto PVC window frames: self threading screws for metal Ø4.8
(6
pieces)
.
Equipment and tools: measuring tape, pencil, drill/screwdriver, set of drill heads
for metal, insert for screwing in, electricians pliers, screwdrivers.
8.2.
Assembly for top hung windows, outward opening
Aside the drawing of specific application using
accessories provided. For different mountings,
please contact manufacturer.
A. Trace centrepoint X in pencil onto the window frame
(Fig.2).
B.
Use brackets “A” art. 4010002 and hinge “D” art.
4010005
(provided)
(Fig.3).
C. Apply the template onto the window frame (fixed part),
taking care to ensure that the axis of the template
coincides with centrepoint X traced earlier (Fig.4).
Attention
: for non coplanar window frames, cut the
grey part of the template along the red line and apply
onto the mobile part of the window frame, taking care
to keep it in the same reference position for the
X
axis.
D. Bore the window frame at the points indicated on the
template (Fig.5).
E. Apply the brackets (A) to the window frame using flat
head screws as indicated above. Check both
horizontal and vertical alignment of brackets.
F. Assemble the hinge for top hung windows (D) onto the
mobile part of the window frame using the reference
points indicated on the template.
G. Complete assembly between chain terminal and quick
hook using the Ø4x32 pin provided and insert into
central position (Fig.6).
H. Hook the actuator onto the brackets inserting the two
channels at the end of the actuator into the pins
provided.
I. Rotate the actuator 90°, bring the chain terminal up to
the hinge and insert the pin into the channel of the
latter. Connect the quick hook onto the bracket. At initial
connection the hook will present some resistance, this
is normal as pieces need to adjust to their sockets.
J. Perform the electrical connections according to the
diagram below or the label on the feeder cable.
K. Check that the output of the chain is perfectly aligned
with the bracket. In the event that this should not be the
case, loosen the fixing screws and reposition the
bracket correctly.
Outward application
Figure 2
Figure 3
Figure 4
Figure 5
D
A
A
