Page 7
Electrical connections must comply with standards in force on the design and
production of electrical appliances.
The actuator has been manufactured according to European Union directives and
conforms to
marking.
Any eventual service or control device for the actuator must be produced according to
standards in force and must comply with the standards issued by the European
Community.
The actuator is packaged in cardboard boxing and each package contains:
Electrical actuator with either 110÷230V~ (a.c.)
50/60Hz or 24V═ (d.c.) with
electrical cable directly connected to the machine.
Drilling template.
Standard support brackets (A).
Bracket for bottom hung window (C).
Bracket for top hung window (D).
Instructions manual.
5. Technical data
Model
KATO 253/230V
KATO 253/24V
Force exerted by thrust and traction
250 N
Strokes
(can be selected at any time)
240, 360 mm
Power supply voltage
110÷230V~ (a.c.)
50/60Hz
24V
═ (d.c.)
Rated absorbed current
0,180 A
0,800 A
Power absorbed at nominal load
~ 30 W
~ 18 W
No load speed
13,5 mm/s
12,8 mm/s
Duration of no load stroke
(240-360 mm)
18 s
– 27 s
19 s
– 28 s
Double electrical insulation
YES
Type of service
S
2
of 3 min
Operating temperature
- 5 + 65 ºC
Protection index for electrical devices
IP30
Adjustment of connection to window frame
Automatic definition of position
Parallel powering of two or more motors
YES
(max 30 actuators)
Synchronised function
Not foreseen
Static hold force
1500N
Stroke-end at opening
At absorption of power
Stroke-end at closing
At absorption of power
Length of power cable
1 m
Dimensions
356x56x33,5 mm
Weight
0,840 Kg
0,820 Kg
The data indicated in these figures is not binding and is subject to variation without notification.
