compressor
part
overheat
temperature
compressor
heavy
gasholder
pressure
high or
safety valve
alerting
vibrate
alternator
smoking
air
compressor
do not work
compressor
pressure
value can
not go up or
can not get
rated
pressure
1. Working pressure high
2. Not use correct lubricating oil
3. Ambient high temperature or poor
ventilation
4. compressor valve block air
leakage or damage
5. compressor can not stop
automatically
1. Reduce working pressure
2. Reference this manual and use
correct compressor oil
3. Shift to good ventilation place
4. Repair valve block or replace
compressor
5. Inspect or replace safety valve or
pressure relay.
1. Discharge pressure high
2. Compressor positioning bolt loose
1. Gas circuit not sealed well
2. Vent valve air leakage
3. Pressure gage broken
4. Safety valve air leakage
5. Purge valve air leakage
6. Compressor stator or rotor short
circuit
7. Compressor valve block air
leakage or damage
1. Inspect or re-seal
2. Replace
(contact your nearest service centre)
2. Replace
(contact your nearest service centre)
3. Replace
4. Replace
5. Replace
6. Replace
7. Repair valve block or replace
compressor
or installation out of level
1. Reduce discharge pressure
2. Reposition
1. Safety valve work pressure high
2. Safety valve damage
3. Pressure relay broken
1. Readjust pressure working value
3. Replace
1. Replace or repair
2. Remove some load
3. Replace alternator winding
4. Replace MDS module or rectifier diode
(contact your nearest service centre)
1. Rotor and stator rub
2. Overload
3. Winding short circuit or grounded
4. MDS or rectifier diode short circuit
or grounded
1. Alternator no output
2. Compressor damage
3. Bottom manual control switch is
close
4. Pressure relay broken
5. Special circuit breaker on control
panel work
6. Thermal protrctor at alternator
bottom work
1. Inspect alternator and AVR
2. Contact supplier to repair or
replace
3. Open manual control switch
4. Replace pressure relay
5. Inspect and recover
6. Recover or replace
Summary of Contents for CT4539
