![background image](http://html1.mh-extra.com/html/neilsen/ct4539/ct4539_original-instructions-manual_3920138023.webp)
equipment is running properly.
Second check if it is overloaded.
Special Warning
1. The Circuit Breaker is not in control of the power of the welder.
2. Do not use the welder and air compressor at the same
time or generator and welder at the same time for-best
performance.
6.6 Welding rods and welding leads chart: For your
reference below these are the rods and cables we see the
best performance in the CT4539.
Work piece
Welding rod
diameter (mm)
2
3
1.6~2.5 2.5~3.2
3.2~4.0
4.0~5.0
5.0~6.0
4~5
6~12
Above 13
thickness (mm)
Welding Current
(A)
7 ENGINE SHUT DOWN
2.0
2.5
3.2
4.0
5.0
40~60
60~80
90~130
160~210
200~270
Welding rod
7.1 Remove all connections this in cludes generator, welding
leads and air compressor outputs. Then turn off the circuit
breaker. If the air compressor was in use.
diameter(mm)
Summary of Contents for CT4539
