![background image](http://html1.mh-extra.com/html/neilsen/ct4539/ct4539_original-instructions-manual_3920138036.webp)
9.4.3 Compressor turns but does not load
Coaxial compressors :
-This may be due to failure of the valves (C1-C2) or of a seal (B1-B2): replace the damaged part.
Pulley drive compressors :
-This may be due to failure of the valves F1 and F2 or of D2: replace the damaged part.
-Check if there is too much condensate water inside the tank.
9.4.4 Compressor no starting
If the compressor has trouble starting, check the following:
-Is the work environment too cold? (Under 0
℃
)
-Is the thermal-breaker tripped? in the silent series
-Is there oil in the housing to ensure lubrication?
-Is power supplied to the electrical line?(thermal-breaker, fuses in good condition)
9.4.5 Compressor no stopping
-If the compressor does not stop when maximum pressure is reached, the tank safety valve comes
into operation. To repair the valve, contact your nearest center.
9.5
STORE AND TRANSPOTATION
For the whole time that the c ompressor is not used before unpacking it, store it in a dry place at a
temperature b5
℃
and +45
℃
and sheltered away from weather.
For the whole time that the compr essor is not used after unpacking it, while waiting to start it up
or due to production stoppages, place sheets over it to protect it from dust, whi ch may settle on
the comp onents. The oil is to be replaced and the operational efficiency of the compr essor is to
be checke d if it is not used for long periods.
WE RESERVE THE RIGHT TO MAKE ANY MODIFICATIONS
WITHOUT PRIOR NOTICE WHENEVER NECESSARY
Summary of Contents for CT4539
