1. Spindle-lock button
2. Disc guard
3. Off/on switch
4. Auxiliary handle
5. Carbon brushes
6. Flange spanner
7. Flanges
8. OPERATION
Before use
Before making assembly, changing and adjustment for any accessory,
disconnect the tool from the mains supply to avoid any unintentional starting.
Please always check the mains supply voltage before use! It must correspond
with the rating label on the appliance.
Remove any packing material and loose parts from unit.
Check the accessories before use. It should be fit with the machine and your
purpose.
Disc guard
CAUTION!
For grinding, the machine should be used only with guard.
The position of the disc guard can be adjusted to suit the working conditions.
To do this, please follow below steps:
1. Loosen the hexagon bolt with the spanner.
2. Turn the guard to the desired position.
3. Retighten the hexagon bolt firmly.
WARNING
Before using the machine other than grinding, the guard should be removed
completely.
Auxiliary handle
CAUTION!
The machine must be used with both handles.
Depending on the working method, the auxiliary handle can be mounted in three
different positions on the grinding head.
Do not continue to use the auxiliary handle if it is damaged.
On/Off switch
Use the On/Off switch to start the machine and keep holding for continuous
operation.
Release the On/Off switch to switch the machine off.
Locking function
The On/Off switch can hold the switch on position for continuous grinding.
Please follow below step:
