bonded wheels (resin, shellac, rubber) will stand rough handling.
As the wheel wears down in use, the effective peripheral surface speed will
reduce if the rotational speed remains constant and may result in a reduced
grinding efficiency. To make sure the machine work smoothly, the wheel should
be replace with the maximum size less than 80 mm.
9.
MAINTENANCE
Keep the ventilation openings clear and clean the product regularly.
If something unusual occurs during use, switch off the supply and disconnect the
plug. Inspect and repair the tool before using it again. The repairs must be carried
out by a qualified technician.
Repair of the tool must only be carried out by a qualified repair technician.
Repair or maintenance by unqualified personnel can lead to a risk of injury.
Use only identical spare parts for repairing a tool. Follow theinstructions
in the maintenance section of this user manual.
Caution!
If the tool’s power cord is damaged, it must be replaced with a specially
manufactured cable available from the after-sales service.
Care and cleaning
Clean the housing only with a damp cloth-do not uses any solvents! Dry
thoroughly afterwards.
10. STROING
Store the machine, operating instructions and where necessary the accessories
in the original packaging. In this way you will always have all the information and
parts ready to hand.
Pack the device well or use the original packaging in order to avoid transit
damage.
Always keep the machine in dry place.
Environment
Should your appliance need replacement after extended use, do
not discard it with the household rubbish but dispose of it in an
environmentally safe way.
Waste produced by electrical machine items should not be
handled like normal household rubbish. Please recycle where
recycle facilities exist. Check with your Local Authority or retailer
for recycling advice.
