Cookware test
en
17
Display
Setting
Value
Power limitation
This enables you to limit the total power of
the hob, if required, due to the circum-
stances of your electrical installation. Ob-
serve the regulations of the local electricity
suppliers. The available settings depend on
the maximum power of the hob. You can find
more information on the rating plate. If the
function is switched on and the hob has
reached the set power limit, the required and
permitted power level flashes and you can-
not select a higher power level.
The power is increased by 500 W with each level.
– Switched off. Maximum power of the hob
1
.
- 1000 W. Lowest power setting.
. - 1500 W.
...
- 3000 W.
. - 3500 W.
- 4000 W.
. - 4500 W.
...
- Maximum power of the hob.
Demo mode
Demonstration mode for the hob: When you
switch on the hob, lights up for a few
seconds and the cooking zones do not heat
up.
- Switched off.
1
- Switched on.
Cookware test
You can use this function to test the quality
of the cookware.
- Not suitable.
- Not optimal.
- Suitable.
Set circulating-air mode or air extraction
mode.
- Configure circulating-air mode.
1
- Configure air extraction mode.
Set the automatic ventilation system start.
The ventilation system starts at the preset
performance level.
- Switched off.
- Switched on.
1
Set the fan run-on for the ventilation system.
If your hob is working in air extraction mode,
the ventilation system is switched on at the
power level for approx. 6 minutes.
If your hob is working in circulating-air mode,
the ventilation system is switched on at the
power level for approx. 30 minutes.
- Switched off.
- Switched on.
1
:
Restoring factory settings
- Individual settings
1
.
- Factory settings.
1
Factory setting
21.2 To go to the basic settings
Requirement:
The hob must be switched off.
1.
To switch on the hob, touch .
2.
Within the next 10 seconds, touch and hold for 4
seconds.
Product information
Display
Customer service directory
Production number
Production number 1
Production number 2
a
The first four displays provide the product informa-
tion. Touch to view the individual displays.
3.
Touch to access the basic settings.
a
and light up as a presetting.
4.
Touch repeatedly until the desired setting ap-
pears.
5.
Select the required setting in the settings area.
6.
Touch and hold for 4 seconds.
a
This saves the settings.
21.3 Discarding changes to the basic
settings
▶
Touch .
a
All changes are discarded and not saved.
Cook wa re te s t
22 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the diameter of the cook-
ware base corresponds to the diameter of the cooking
zone being used.
