Operating modes
en
9
Ope ra tin g mode s
7 Operating modes
You can use your appliance in air extraction mode or
circulating-air mode.
7.1 Air extraction mode
The air which is drawn in is cleaned by the grease fil-
ters and conveyed to the exterior by a pipe system.
The air must not be discharged into a
flue that is used for exhausting fumes
from appliances burning gas or other
fuels (not applicable to appliances that
only discharge the air back into the
room).
¡
If the exhaust air is to be conveyed
into a non-functioning smoke or ex-
haust gas flue, you must obtain the
consent of the heating engineer re-
sponsible.
¡
If the exhaust air is conveyed
through the external wall, a tele-
scopic duct should be used.
7.2 Air recirculation
The air which is drawn in is cleaned by the grease fil-
ters and an odour filter, and conveyed back into the
room.
To bind odours in air recirculation
mode, you must install an odour filter.
The different options for operating the
appliance in air circulation mode can
be found in our catalogue. Alternatively,
ask your dealer. The required accessor-
ies are available from specialist retail-
ers, from our after-sales service or from
the online shop.
Note:
When cooking intensively and for a long time,
moisture is released into the air in the room. When us-
ing the appliance in air recirculation mode, we recom-
mend ventilating the kitchen adequately, e.g. by briefly
opening a window to remove excessive moisture.
Be fore u s in g for th e firs t time
8 Before using for the first time
Observe the following recommendations.
8.1 Initial cleaning
Remove any leftover packaging from the hob surface
and wipe the surface with a damp cloth. You can find a
list of recommended detergents on the official website
www.neff-international.com.
More information on care and cleaning. →
8.2 Preparing the appliance
To ensure correct operation, you must arrange the
components in this order:
1.
Insert the filter.
2.
Insert the metal grease filter.
Note:
Never operate the appliance without the metal
grease filter and the overflow container.
8.3 Cooking with induction
In comparison to conventional hobs, induction techno-
logy brings with it a series of changes and has a num-
ber of benefits such as time savings when cooking and
frying, energy savings as well as greater ease of clean-
ing and care. It also offers improved heat control as the
heat is generated directly in the cookware.
8.4 Cookware
You can find a list of recommended cookware on the
official website www.neff-international.com.
Further information on suitable cookware. →
8.5 Setting the operating mode
The appliance is supplied with a preset circulating-air
mode.
When your hob is installed with an air outlet to the out-
side, you must configure the setting to this mode.
You can find additional information about this in the
section entitled
8.6 Setting Home Connect
When you first switch on the appliance, you will be
prompted to set your home network. lights up for a
few seconds on the display panel.
To begin the connection to Home Connect, touch
and proceed in accordance with the information in the
section
.
To end the setting, switch off the hob.
You can also adjust the Home Connect setting at a dif-
ferent time.
Ba s ic ope ra tion
9 Basic operation
9.1 Switching on the hob
▶
Touch .
A signal sounds. The symbols for the cooking zones
and the currently available functions light up.
lights up in the cooking zone displays.
a
The hob is ready to use.
