23
Fitting the appliance door
Refit the appliance door after cleaning.
1.
Insert the hinges in the left and right-hand bracket (figure C).
The notch on both hinges must engage.
2.
Open the appliance door fully.
3.
Close the locking levers on the left and right-hand side fully
(figure D).
The appliance door is secured and can no longer be
removed.
4.
Close the appliance door.
Cleaning the door panels
To assist with cleaning, the inner door panel can be removed
from the appliance door.
ã=
Risk of injury!
The components inside the appliance door may have sharp
edges. Take care not to cut yourself. Wear protective gloves.
ã=
Risk of injury!
The appliance must not be used again until the door panels
and appliance door have been correctly fitted.
Removing the door panel
1.
Remove the appliance door and lay it on a soft, clean surface
with the front side facing downwards (see section: Removing
and installing the appliance door).
2.
Using both hands next to the hinges, gently lift the glass
panel and pull it out towards the hinges (figure A).
Cleaning
Clean the door panel with glass cleaner and a soft cloth.
Caution!
Do not use any sharp or abrasive medium or a glass scraper.
The glass could be damaged.
Fitting the door panel
1.
Replace the door panel (Fig. B) and press downwards at the
front next to the hinges until it clicks into place.
2.
Refit the appliance door.
Cleaning the rails
The rails can be removed for cleaning.
ã=
Risk of burning due to hot components in the cooking
compartment!
Wait until the cooking compartment has cooled down.
1.
Pull the rails forwards and unhook them to the side.
2.
Clean the rails with washing-up liquid and a sponge/brush
or
Clean the rails in the dishwasher.
3.
Hook the rails in at the back and front and slide them back
until they engage.
Each set of rails only fits on one side.
&
'
$
%
