Page 13
306-0008-002-001 Rev500 Neets 4 relay
Below you find some examples on how to control the relays.
1. Activate relay 2 on all relay boxes connected.
Relay=2,Action=Set\CR
When entering this command in the Neets Configurations Utility it looks like this:
2. Activate relay 3 for 20 seconds on relay box with ID unit 2.
Relay=3,Action=Set,Time=20,Unit=2\CR
3. Toggle relay 4, 12 seconds after the command is send and then hold it for 5,8 seconds.
Relay=4,Action=Toggle,Delay=12,Time=5.8,Unit=2\CR
Unit=<Z>
Description
0-4
Set the ID number of the relay box this command is intended to. If Unit number is
0 or not used the message will be send to all relay boxes.
Summary of Contents for 4 Relay box
Page 1: ......