ExhaustRail System 920/400
1 Preface
Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and
developer of products and solutions for the environ-
mental technology sector. Our innovative products
will filter, clean and recycle in the most demanding of
environments. Nederman's products and solutions will
help you improve your productivity, reduce costs and
also reduce the impact on the environment from in-
dustrial processes.
Read all product documentation and the product iden-
tification plate carefully before installation, use, and
service of this product. Replace documentation imme-
diately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements
of relevant EC directives. To maintain this status, all
installation, maintenance, and repair is to be done
by qualified personnel using only Nederman original
spare parts and accessories. Contact the nearest au-
thorized distributor or Nederman for advice on tech-
nical service and obtaining spare parts. If there are
any damaged or missing parts when the product is de-
livered, notify the carrier and the local Nederman rep-
resentative immediately.
2 Safety
2.1 Classification of important informa-
tion
This document contains important information that
is presented either as a warning, caution or note, ac-
cording to the following examples:
WARNING! Risk of personal injury
Warnings indicate a potential hazard to the
health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage
Cautions indicate a potential hazard to the
product but not to personnel, and how that
hazard may be avoided.
NOTE!
Notes contain other information that is import-
ant for personnel.
2.2 General
WARNING! Risk of personal injury and/or
product damage
• The system must not be used for other pur-
poses than extracting vehicle exhaust fumes.
• If the system is designed for use only with
stationary vehicles, the vehicle must not be
moved when the hose nozzle has been con-
nected to the vehicle exhaust pipe.
• Always disconnect the nozzle from the ex-
haust pipe before the vehicle is driven out of
the garage.
• The system must not be used when working
on the vehicle´s fuel system, when rechar-
ging the batteries or whenever there is a risk
of inflammable dust or explosive gases.
• When working with a running engine, espe-
cially in a greasing pit, a gas detector is re-
commended.
• Check that there is enough suction capacity
in the exhaust hose before it is connected to
the vehicle’s exhaust pipe. If not, check the
fan impeller rotation direction and/or damper
function. If necessary check the installation
of the fan start switch.
• Check that the nozzle is correctly fitted to the
exhaust pipe.
• Use a dust filter mask during service and re-
pair work inside the system (for example
hose or nozzle).
• For systems with automatic disconnection,
the maximum speed must not be more than
15 km/h.
• Check that the hose or nozzle will not snag
any protruding parts on the vehicle or near
the surroundings.
• Risk of burn injuries! Avoid contact with a hot
hose or nozzle when using the system for a
long time with high engine speed.
EN
11
