Nederman FX2 Original Series, User Manual

Page: 15 / 91

FX
2
ESD/EX
1 Preface
Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and
developer of products and solutions for the environ-
mental technology sector. Our innovative products
will filter, clean and recycle in the most demanding of
environments. Nederman's products and solutions will
help you improve your productivity, reduce costs and
also reduce the impact on the environment from in-
dustrial processes.
Read all product documentation and the product iden-
tification plate carefully before installation, use, and
service of this product. Replace documentation imme-
diately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements
of relevant EC directives. To maintain this status, all
installation, maintenance, and repair is to be done
by qualified personnel using only Nederman original
spare parts and accessories. Contact the nearest au-
thorized distributor or Nederman for advice on tech-
nical service and obtaining spare parts. If there are
any damaged or missing parts when the product is de-
livered, notify the carrier and the local Nederman rep-
resentative immediately.
2 Safety
2.1 Classification of important informa-
tion
This document contains important information that
is presented either as a warning, caution or note, ac-
cording to the following examples:
WARNING! Risk of personal injury
Warnings indicate a potential hazard to the
health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage
Cautions indicate a potential hazard to the
product but not to personnel, and how that
hazard may be avoided.
NOTE!
Notes contain other information that is import-
ant for personnel.
2.2 General
WARNING! Risk of personal injury
• Always read
Chapter 2 Safety before install-
ation, use, service, or troubleshooting of this
product.
• Follow all local rules and regulations for in-
stallation, service and troubleshooting of this
product.
• The product must not be used for extracting
such dust/gas-mixtures which could affect
the product materials. See
Figure 2 .
• The Extractor Arm must not be used for ex-
tracting gas-mixtures in explosion category II
C *.
• The Extractor Arm must not be used for ex-
tracting poisonous substances.
• Check that no objects which can cause spark-
ing or fire can be drawn into the arm.
• Avoid mixing dust from different processes,
for example, service works and plastic grind-
ing combined with metal grinding.
EN
15