NED
SUCL2025T3
UME-0017-08
16
3 Hardware
3.1 Camera Connection
(1)
Camera Link cables shall be used to connect the camera unit with the frame grabber
board.
Use two cables of the same length and the same manufacturer. If you use asymmetric
Camera Link cables, connect the camera with the connector labeled as
”Camera side”.
(2) Connect with a power supply.
Use a power cable to connect the camera with the power source for the camera. Insert
the plug end of the cable into the camera. Attach the opposite end (loose wires) to the
power unit.
Other than the above, a personal computer, a frame grabber board, a photographic lens,
a photographic lens mount, a light source and an encoder are necessary, depending on
the situation.
PC
Camera Link
Frame Grabber Board
Line sensor camera
Camera Link Cable
3M:14B26-SZLB-xxx-0LC
Power Cable
Camera Power
supply
DC+12V 15W
DGP-10 (10m)
Figure 3-1-1 Connections between Camera and Frame Grabber Board and Power Supply
There are two connectors available for the Camera Link Medium Configuration board.
Always check the frame grabber board specifications before making connections.
